The PX Series offers an effortless, single-motion, means of egress while keeping the integrated look and feel of all Syntégra door systems. Used in applications where a full-length exit device is not required, the PX Series shares the same Pushpad profile as in the full-size exit device to ensure continuity of design. The PX also features the same unique integrated lock case as all other Syntégra door systems, and offers many of the same mechanical and electrical options. Syntégra proves that smaller does not necessarily mean less when it comes to functionality.
Single doors, pairs and double egress pairs found in the following applications:
Depending on your needs, we have an extensive selection of high-performance, energy-efficient and fire-rated products to choose from, including the following.
If you want top performance and high-speed operation, our high-performance security doors will have you covered. These doors are among the best overhead door investments with some of the lowest overall lifetime costs:
Rollup fire doors are rated structural fire barriers that help block the spreading of hazardous fire and smoke by compartmentalizing a building space and keeping the event isolated. Many buildings today mandate the placement of rolling steel fire doors as a standard safety precaution.
The Firemiser Insulated Rolling Fire Door is perfect for an exterior application and reduces sound transfer thanks to mineral wool insulation. Mineral wool insulation also minimizes thermal transfer, which can help you with temperature control inside your building. Opt for the SmokeShield™ seal package for your fire-rated door if you’re required to conform to UL 1784 or want an additional barrier to eliminate smoke migration throughout your building.
If our standard levers don’t match your style preferences please ask about our Décor Lever Series.
All functions are factory configured. In most cases, these functions can be changed as required in the field. Consult factory for instructions.
* Equivalent ANSI/BHMA A156.10 functions used for reference
Antimicrobial coatings are available for healthcare, education and other germ sensitive environments.
Model Number | ANSI Function | Description |
---|---|---|
PX | 1 | Exit Only, no trim. |
PX-LC | 3 | Entrance by fixed lever/pull when latch is released by key. Key removable only when locked (Nightlatch). |
PX-LC | 8 | Entrance by lever. Key locks or unlocks lever. |
PX-LC | 9 | Entrance by lever. Key removable only when locked (Nightlatch). |
PX-LC2 | 10 | Entrance by lever. Inside or outside key locks or unlocks lever. Outside key releases latch. |
PX-C | 13 | Entrance by key. |
PX-L | 14 | Entrance by lever. Always active, no cylinder. |
Device Functions | Configured from the factory. See Function Chart for description. |
---|---|
Fire Ratings | UL10C with single-point top latching or top and bottom latching. |
Pushpad Height | 4” |
Pushpad Width | 8 ¼" (210 mm) |
Pushpad Projection - Extended | 1-3/16" (30 mm) |
Pushpad Projection - Depressed or with Door Held Open | 3/16" (5 mm) |
Pushpad Centerline | 38-1/2" (978 mm) from finished structural floor (not including floor covering). |
Pushpad Materials | 6063-T6 Extruded Aluminum with finish inserts. |
Strikes | Top strike can be mortised or surface applied (P/N TSK-1 Kit). Bottom strike, if applicable, is a ½” diameter hole threshold or surface strike (P/N BSK-1 Kit). |
Electrical Options | LM - Latchbolt monitoring provides notification when the latch is extended. |
ELS - Electrified lever. Energizing allows lever to rotate to retract the latch(es). Fail-Secure or Fail-Safe available. | |
Mounting | Concealed fasteners on pushbar end caps, latches and handles. |
Latchbolts | Top latching standard with – 7/8" (22.2 mm) throw. Projection type Friction limiting-design with deadlatch feature. Bottom – Massive Stainless Steel 5/8" throw bolt with conical tip. |
Optional Keyed Cylinder | Standard diameter Mortise Cylinder with 'standard' cam. Accepts 1" cylinder length or greater. Cylinder in excess of 1” requires a spacer collar equal to this excess (Example 1-1/8" length requires a 1/8" collar). |
Function 10 - Back-to-back Cylinders | Requires a 3/16" collar for a 1" cylinder length. For longer cylinders, use the following to dimension the collar: Cylinder Length –1” + 3/16”= Collar (Ex. 1-1/4" requires a 7/16” collar). |
This product is not available in Quebec. Therefore some of the following downloads may not be available in French.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
This is a paragraph. Writing in paragraphs lets visitors find what they are looking for quickly and easily.
All Rights Reserved | Bravura Group