Syntegra

LX Series

Lever Operated Openings

The LX Series exemplifies Syntégra’s “deeper integration” attitudes and goals. The central lock case accepts handles and keyed cylinders from either and/or both sides. The lock case is configurable with the same popular functions offered in conventional locksets, but we can also do much more. The lever handles are protected by a break-away clutch allowing these systems to be used in the most abusive and demanding applications. Syntégra door systems do not use bulky escutcheons, roses, or edge plates to hide door preparations and mechanisms. Only the vital elements that are needed for operation are exposed, and everything else is concealed and protected.



Imagine being able to operate and secure each leaf of a pair of doors independently without the need for coordinators, astragals, and manual flushbolts. Pairs and single doors also benefit in concealing the side latch and strike from view and tampering by latching at the top of the door. With electrical functions such as electrified lever (ELS) and electrified latch retraction (ML), the LX Series will interface with virtually any access control and door automation system.

Syntegra LX Series Ontario

TECHNICAL INFORMATION

downloads and details

Customer-Favourite Commercial Rollup Doors

Depending on your needs, we have an extensive selection of high-performance, energy-efficient and fire-rated products to choose from, including the following.

SECURE ROLLUP GARAGE DOORS

If you want top performance and high-speed operation, our high-performance security doors will have you covered. These doors are among the best overhead door investments with some of the lowest overall lifetime costs:

  • Extreme® 300 Series High-Performance Rollup Door: This springless series door is high-speed and intelligent thanks to the Apex SmartController. Designed to last 300,000 maintenance-free cycles, the Extreme 300 has it all.
  • Extreme® 1024 Long-Lasting Rollup Door: The Extreme 1024 high-performance rapid-roll door offers intelligent Apex SmartController operation and can withstand an impressive 1,000,000 maintenance-free cycles.
  • StormDefender™ Safe Room Door: This commercial rollup door is designed explicitly with security and life safety in mind, guarding you and your building against tornadoes, hurricanes and other severe weather.
  • EntryDefender™ High-Security Door: The EntryDefender™ Door meets the U.S. Department of State Standard for forced entry for a five-, 15- and 60-minute mob-style attack.
FIRE-RATED ROLLUP SERVICE DOORS

Rollup fire doors are rated structural fire barriers that help block the spreading of hazardous fire and smoke by compartmentalizing a building space and keeping the event isolated. Many buildings today mandate the placement of rolling steel fire doors as a standard safety precaution.



The Firemiser Insulated Rolling Fire Door is perfect for an exterior application and reduces sound transfer thanks to mineral wool insulation. Mineral wool insulation also minimizes thermal transfer, which can help you with temperature control inside your building. Opt for the SmokeShield™ seal package for your fire-rated door if you’re required to conform to UL 1784 or want an additional barrier to eliminate smoke migration throughout your building.

Syntegra LX Series Canada

Areas of Refuge – Stairwell, Elevator Lobby, Elevator Cab

Syntegra LX Series Whitby

Office single and pairs

Syntegra LX Series Oshawa

Main entrances

Syntegra LX Series Durham Region

Surgical suites

Typical Applications

Single doors, pairs and double egress pairs found in the following applications:

BENEFITS

Tested Durability
  • Tested Durability
  • Solid cast or forged lever handles
  • Break-away clutch to prevent damage from abuse
  • Far exceeds industry standards for security, strength, and durability.


Enhanced Security
  • Patented friction-limiting latchbolt with 7/8″ throw
  • Available in top latching or top and bottom latching
  • Levers protected with anti-abuse clutch
  • Protected latches and operating mechanisms are concealed within the steel door and sheltered from attack, abuse and tampering


Versatility
  • Extensive list of functions to work with most openings and applications
  • Access control ready with electrified lever, latch retraction, and RX options
  • Electrical options available in kit-form allowing for future upgrades


Uncompromised Safety
  • Listed for fire (UL10C) with single-point top latching or top and bottom latching.
  • Top latching instead of side edge latchbolt and strike for singles and pairs prevents catching on clothing or equipment
  • Optional Antimicrobial coatings available for healthcare, education and other germ sensitive environments


Unequaled Aesthetics
  • Escutcheon-free levers available in the most popular styles and finishes
  • Optional integrated top strike prep without the need for a surface mounted auxiliary plate
  • Projection type latchbolt minimizes the top strike view and minimizes the top door “notch” required by others
  • No floor strikes required – Fire ratings without the need for bottom latchbolts
Lever Options

If our standard levers don’t match your style preferences please ask about our Décor Lever Series.

Syntegra LX Series Toronto
Hardware finish options

Antimicrobial coatings are available for healthcare, education and other germ sensitive environments.

Syntegra LX Series Mississauga
Device Functions Configured from the factory. See Function Chart for description.
Fire Ratings UL10C with single-point top latching or top and bottom latching.
Lever Centerline 38-1/2" (978 mm) from finished structural floor (not including floor covering).
Lever Materials Cast Stainless Steel. Finished to match customer requirements.
Lever Projections 01 – Square = 2-5/32" (55 mm) | 02 – Tubular = 2-9/16" (65 mm) | 03 – Curved = 2-3/8" (60 mm)
Strikes Top strike can be mortised or surface applied (P/N TSK-1 Kit). Bottom strike, if applicable, is a ½” diameter hole threshold or surface strike (P/N BSK-1 Kit).
Electrical Options ML - Motorized latch retraction quietly and efficiently retracts the latch(es) and pushbar when energized. Configured for fail-secure to comply to fire ratings
ELS - Electrified lever. Energizing allows lever to rotate to retract the latch(es). Fail-Secure or Fail-Safe available.
LM - Latchbolt monitoring provides notification when the latch is extended.
Latchbolts Top latching standard with – 7/8" (22.2 mm) throw. Projection type Friction limiting-design with deadlatch feature. Bottom – Massive Stainless Steel 5/8" throw bolt with conical tip.
Optional Keyed Cylinder Standard diameter Mortise Cylinder with 'standard' cam. Accepts 1" cylinder length or greater. Cylinder in excess of 1” requires a spacer collar equal to this excess (Example 1-1/8" length requires a 1/8" collar).
Back-to-back Cylinders Requires a 3/16" collar for a 1" cylinder length. For longer cylinders, use the following to dimension the collar: Cylinder Length –1” + 3/16”= Collar (Ex. 1-1/4" requires a 7/16” collar).
HARDWARE SPECIFICATIONS

This product is not available in Quebec. Therefore some of the following downloads may not be available in French.

Syntegra LX Series Ottawa

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating Inside Lever or outside lever


OUTSIDE LEVER Locked by

Cannot be locked


OUTSIDE LEVER Unlocked by

Always unlocked


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Markham

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating Inside Lever, or | Rotating outside lever only when unlocked by key or thumbturn | Turning key in outside cylinder


OUTSIDE LEVER Locked by

Turning inside thumbturn or, | Turning key in outside cylinder


OUTSIDE LEVER Unlocked by

Turning inside thumbturn or, | Turning key in outside cylinder


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Vaughan

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating Inside Lever, or | Rotating outside lever only when unlocked by key, or | Turning key in outside cylinder


OUTSIDE LEVER Locked by

Turning key in outside Cylinder


OUTSIDE LEVER Unlocked by

Turning key in outside cylinder


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Burlington

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating inside lever, or | Turning key in outside cylinder


OUTSIDE LEVER Locked by

Always locked


OUTSIDE LEVER Unlocked by

Cannot be unlocked


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Hamilton

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating inside lever, or | Rotating outside lever only when unlocked by key inside | Turning key in outside cylinder only


OUTSIDE LEVER Locked by

Turning inside key in inside cylinder


OUTSIDE LEVER Unlocked by

Turning key in inside cylinder


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Kingston

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Turning key in inside or outside cylinder, fixed levers or no levers


OUTSIDE LEVER Locked by

Always locked


OUTSIDE LEVER Unlocked by

Cannot be unlocked


INSIDE LEVER Operation

Always fixed

Syntegra LX Series Brampton

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating inside lever Outside blank


OUTSIDE LEVER Locked by

N/A


OUTSIDE LEVER Unlocked by

N/A


INSIDE LEVER Operation

Always free egress

Syntegra LX Series Cornwall

Equivalent ANSI/BHMA Function *

DESCRIPTION Latch(es) operated by

Rotating inside lever, or | Rotating outside lever only when unlocked by key or switched power | Turning key in outside cylinder


OUTSIDE LEVER Locked by

Removing switched power


OUTSIDE LEVER Unlocked by

Turning key in outside cylinder or switched power allows lever to be rotated


INSIDE LEVER Operation

Always free egress

All functions are factory configured. In most cases, these functions can be changed as required in the field. Consult factory for instructions.


* Equivalent ANSI/BHMA A156.10 functions used for reference